Which Roland TD-27KV2 models work with WebEDrums?
The table lists what Roland's TD-27KV2 page says, checked on 8 November 2026. The page describes the TD-27KV as the mid-level model and does not compare the two, so that kit has no row; the Roland preset is the one WebEDrums applies to a Roland TD module. On 11 November 2026 Roland's page marks the TD-27KV2 as discontinued; its kit list now shows the V-Drums 3, 5 and 7 Series, each with a page here.
| Model | What the manufacturer lists | In WebEDrums |
|---|---|---|
| Roland TD-27KV2 | Roland lists a TD-27 module, a PD-140DS 14-inch snare with a three-layer mesh head that detects head, rimshot and cross-stick, three PDX-100 toms, a VH-14D V-Hi-Hat, a CY-12C-T crash and a CY-14C-T second crash on the CRASH 2 jack, a CY-18DR 18-inch ride that detects edge to bell, and a KD-10 kick pad. The module has a built-in USB audio/MIDI interface, MIDI through dedicated I/O ports, Bluetooth for audio from a smartphone or laptop, a stereo aux input and four extra trigger jacks (AUX1 to AUX3 and CRASH 2). | The Roland preset, over the USB cable. The ride's bow, edge and bell notes and the hi-hat's open and closed notes on the bow and the edge are in the table below. Map the second crash to the Crash 2 row; the AUX jacks have no slot of their own. |
Questions about the Roland TD-27KV2 models
Does the TD-27 send MIDI over USB?
Roland's TD-27KV2 page lists a built-in USB audio/MIDI interface, with MIDI also available through dedicated I/O ports. The page does not name the module's connectors, so use the USB port that connects to a computer, with a data cable. WebEDrums needs only the MIDI.
Does the TD-27's Bluetooth work as MIDI?
Roland describes it as onboard Bluetooth for drumming with music from a smartphone or laptop, which is audio streaming, and does not mention Bluetooth MIDI. The connection to WebEDrums is the USB cable.
Can I use the AUX trigger jacks with WebEDrums?
Roland lists three auxiliary trigger inputs and a CRASH 2 jack for extra pads. WebEDrums has pad slots for three toms and two crashes: a second crash maps to Crash 2, while an extra pad on an AUX jack has no slot, and a note outside the table is silent rather than counted as a stray hit.
How does the Roland TD-27KV2 connect to a computer?
Through the module's USB port. Roland's TD-27KV2 page lists a built-in USB audio/MIDI interface, with MIDI also available through dedicated I/O ports, and does not name the connectors, so use the port that connects to a computer, with a cable that carries data. WebEDrums only needs the MIDI; the USB audio is for recording.
Roland describes the module's Bluetooth as for drumming with music from a smartphone or laptop and does not mention Bluetooth MIDI, so the computer connection stays USB.
Which preset do I pick in WebEDrums?
When the module's USB name matches a Roland module, the kit setup page starts from the Roland defaults, the table below, and says so: "Using the Roland defaults". Hit each pad and watch the kit on screen. If you changed note numbers on the module, run the guided setup instead ("Record every pad"): it listens to each pad, zone by zone, and saves what it hears. "Reset to the Roland defaults" brings the table back. Review each pad's lane before saving, and change it later in Settings, Kit, Edit mapping.
Which pads and zones does the Roland preset map?
This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the Roland defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.
| Pad | Notes the preset listens for | Plays as |
|---|---|---|
| Kick | 36 head | Kick |
| Snare | 38 head · 40 rim · 37 cross-stick | Red (snare) |
| Hi-hat | 46 bow · 26 edge · 42 bow · 22 edge | Yellow cymbal |
| Tom 1 (high) | 48 head · 50 rim | Yellow tom |
| Tom 2 (mid) | 45 head · 47 rim | Blue tom |
| Floor tom | 43 head · 58 rim | Green tom |
| Crash | 49 bow · 55 edge | Green cymbal |
| Ride | 51 bow · 59 edge · 53 bell | Blue cymbal |
| Crash 2 (optional) | 57 bow · 52 edge | Green cymbal |
How do I keep the latency down?
Roland describes a stereo aux input on the module for a monitor feed, including a click track. Where the module mixes it into its headphones, the computer's headphone output into that input puts the song and the kit in the same ears with no software delay; Roland's page does not say how the aux input is mixed, so check the module's guide.
The module's own sounds have no software delay, so headphones on the module are the lowest-latency way to hear the kit. If you would rather hear the browser's drum sounds ("Kit sounds in the browser" in Settings, Audio, six kit styles), run the timing calibration once: eight clicks, hit the snare on each, about six seconds. It measures your computer's audio delay and judges hits against what you heard. Audio sent to the module or the headphones over Bluetooth adds its own delay to the song, so calibrate again after switching to it, or stay wired.
What works in Chrome, Edge and Firefox?
Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its own name after a one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and the setting survives reloads. Safari has no Web MIDI, so a Mac needs Chrome, Edge or Firefox. If the browser lists nothing, check that the cable carries data, try another port without a hub, and close any other program that has the module open.
Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.
Which games and apps read the Roland TD-27KV2?
Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.
Not bought it yet, or thinking of the next kit?
The buying guide puts the Roland TD-27KV2 next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each. The other Roland kits are on the Roland page.
Sources
Checked on October 16, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.