Skip to content
WebEDrums

Roland TD516 and TD513 (V-Drums 5 Series) with WebEDrums: USB MIDI setup, preset and pad map

The TD516 and the TD513 are Roland's V-Drums 5 Series kits, built on the V51 module, which Roland describes as made for serious drummers. This page covers what each kit includes and what it leaves out of the box, the V51's two USB modes and the cable it needs, the Roland preset's notes and what we have not checked on this module, where the second crash and the extra trigger jacks go, and what works in Chrome, Edge and Firefox.

Published by WebEDrums Updated

Three full plays a day, every feature, no account. Chrome, Edge or Firefox.

Which Roland TD516 and TD513 models work with WebEDrums?

The table lists what Roland's TD516 and TD513 pages say, checked on 11 November 2026. The V-Drums 3 Series page covers the kits below them and the V-Drums 7 Series page the ones above. We have not played or connected a V51 kit.

The Roland TD516 and TD513 models, what the manufacturer lists for each and what it means in WebEDrums
ModelWhat the manufacturer listsIn WebEDrums
Roland TD516 Roland lists a V51 module, a PD-140DS digital snare with positional sensing and cross stick, two PD-10P toms and a PD-12P tom, a VH-14D digital hi-hat, a CY-12C-T crash and a CY-14R-T second crash, a CY-18DR digital ride with bow, edge and bell, a KD-12 kick pad and an MDS-Standard3 stand. The kick pedal, the snare stand, the hi-hat stand and the throne are not included. The Roland preset's notes, over the USB cable (see the preset section for what we have not checked on the V51). Map the second crash to the Crash 2 row. The digital snare, hi-hat and ride are recorded in their own pad slots like any other pad.
Roland TD513 The same V51 module and stand, with a PD-12P snare, two PD-8H toms and a PD-10H tom, a VH-10 hi-hat for a conventional hi-hat stand, a CY-12C-T crash and a CY-14R-T second crash, a CY-16R-T ride with bow, edge and bell, and a KD-10 kick pad. Roland says the module's digital trigger ports are for digital pads sold separately. The kick pedal, the snare stand, the hi-hat stand and the throne are not included. The same connection and preset. Map the second crash to the Crash 2 row.

Questions about the Roland TD516 and TD513 models

What is the difference between the TD516 and the TD513?

The pads around the same V51 module. Roland's lists give the TD516 its digital pads, a PD-140DS snare, a VH-14D hi-hat and a CY-18DR ride, larger toms and a KD-12 kick pad; the TD513 has a PD-12P snare, a VH-10 hi-hat, a CY-16R-T ride, smaller toms and a KD-10. Both have two crashes and the same stand. In WebEDrums the connection and the preset are the same.

Does the V51 need a driver to work with WebEDrums?

Not for MIDI. Roland lists the V51's USB as class compliant for audio and MIDI, and its manual describes two driver modes: GENERIC uses the operating system's driver and carries USB MIDI with two channels of audio, and VENDOR uses Roland's driver and carries USB MIDI with 32 channels. WebEDrums needs only the MIDI, which both carry. The mode is under SETUP, USB AUDIO, Driver Mode, and a change takes effect after the module is switched off and on again.

Which USB cable does the V51 need?

The V51's USB COMPUTER port is USB Type-C. Roland's troubleshooting page for the V51 says the module does not work with USB 3.0 cables and tells you to use a USB 2.0 cable, so the cable is the first thing to change if the computer does not see the module.

Can I use the extra trigger jacks with WebEDrums?

Roland lists four trigger jacks on the V51 beyond the main harness, CRASH 2, AUX 1/TOM 4, AUX 2 and AUX 3, and three digital trigger ports. WebEDrums has pad slots for three toms and two crashes: the second crash maps to Crash 2, and a fourth tom or an auxiliary pad has no slot, so its notes are silent rather than counted as stray hits.

How do the Roland TD516 and TD513 connect to a computer?

Through the V51's USB COMPUTER port, which is USB Type-C and which Roland lists as class compliant for audio and MIDI. The manual describes two driver modes: GENERIC, on the operating system's driver, carries USB MIDI and two channels of audio; VENDOR needs Roland's driver and carries USB MIDI and 32 channels. WebEDrums needs only MIDI, so GENERIC works with nothing installed and a module already in VENDOR mode needs no change. The setting is under SETUP, USB AUDIO, Driver Mode, and takes effect after a power cycle.

Roland's troubleshooting page says the V51 does not work with USB 3.0 cables: use a USB 2.0 cable. The module also has MIDI IN and OUT/THRU connectors, and Roland mentions Bluetooth for audio and MIDI; we have tested neither, and the connection described here is the cable.

Which preset do I pick in WebEDrums?

The kit setup page starts from the Roland defaults, the table below, when the module's USB name contains Roland, TD- or V-Drums, and says so: "Using the Roland defaults". We have not connected a V51, so we do not know the name it reports. If the page says "Using the General MIDI defaults" instead, or a pad lights the wrong drum, choose "Record every pad": the app listens to each pad in turn, zone by zone, and saves what it hears, which works for any module.

Roland keeps the V51's default note numbers in the module's Data List, which we have not checked against the table below; the recorded setup does not depend on them. Review each pad's lane before saving, and change it later in Settings, Kit, Edit mapping.

Which pads and zones does the Roland preset map?

This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the Roland defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.

MIDI notes the Roland preset maps to each pad and lane
PadNotes the preset listens forPlays as
Kick 36 head Kick
Snare 38 head · 40 rim · 37 cross-stick Red (snare)
Hi-hat 46 bow · 26 edge · 42 bow · 22 edge Yellow cymbal
Tom 1 (high) 48 head · 50 rim Yellow tom
Tom 2 (mid) 45 head · 47 rim Blue tom
Floor tom 43 head · 58 rim Green tom
Crash 49 bow · 55 edge Green cymbal
Ride 51 bow · 59 edge · 53 bell Blue cymbal
Crash 2 (optional) 57 bow · 52 edge Green cymbal
  • Second crash: both kits ship with one. Map it to the Crash 2 row; it plays the green cymbal with the first.
  • Ride: bow, edge and bell, from the TD516's digital CY-18DR as from the TD513's CY-16R-T, all play the blue cymbal: the games have one ride lane.
  • Hi-hat: open and closed notes on the bow and the edge all play the yellow cymbal. Pedal position messages are ignored and only the notes count.
  • AUX jacks: a fourth tom or an auxiliary pad has no slot in WebEDrums and stays silent.

How do I keep the latency down?

Roland lists a MIX IN jack on the V51, a stereo quarter-inch socket, and two PHONES jacks. A cable from the computer's headphone output into MIX IN puts the song next to the kit in the module's headphones, with no software delay on the drums; Roland's pages do not describe how MIX IN is balanced, so check the module's guide. Audio streamed to the module over Bluetooth adds its own delay to the song.

The module's own sounds have no software delay, so headphones on the module are the lowest-latency way to hear the kit. If you would rather hear the browser's drum sounds ("Kit sounds in the browser" in Settings, Audio, six kit styles), run the timing calibration once: eight clicks, hit the snare on each, about six seconds. It measures your computer's audio delay and judges hits against what you heard. Audio sent to the module or the headphones over Bluetooth adds its own delay to the song, so calibrate again after switching to it, or stay wired.

What works in Chrome, Edge and Firefox?

Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its own name after a one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and the setting survives reloads. Safari has no Web MIDI, so a Mac needs Chrome, Edge or Firefox. If the browser lists nothing, check that the cable carries data, try another port without a hub, and close any other program that has the module open.

Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.

Which games and apps read the Roland TD516 and TD513?

Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.

Not bought it yet, or thinking of the next kit?

The buying guide puts the Roland TD516 and TD513 next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each. The other Roland kits are on the Roland page.

Sources

Checked on November 11, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.

Product names belong to their owners; WebEDrums is not affiliated with Clone Hero, YARG, Alesis, Roland or Yamaha.