Which Roland TD-07KV2 and TD-07DMK2 models work with WebEDrums?
The table lists what Roland's pages for the TD-07KV2 and the TD-07DMK2 say, checked on 11 November 2026, with the earlier TD-07KV for comparison. The Roland TD-02 page covers the entry kits below them. We have not played a TD-07; the Roland preset is the one WebEDrums applies to a Roland TD module.
| Model | What the manufacturer lists | In WebEDrums |
|---|---|---|
| Roland TD-07KV2 | Roland lists a TD-07 module, a PD-10H 10-inch snare, two PD-8H 8-inch rack toms and a PD-10H 10-inch floor tom (it notes the toms do not support rim shots), a CY-5 10-inch hi-hat with an FD-9 control pedal, a CY-8 12-inch crash, a CY-5 10-inch second crash, a CY-8 12-inch ride, a KD-10 kick pad and a four-post stand. The kick pedal and the throne are not included. The module has a USB COMPUTER port (USB B type) for USB MIDI and two-channel USB audio, MIX IN and OUTPUT/PHONES mini jacks, and Bluetooth for audio streaming and for MIDI over Bluetooth Low Energy; no MIDI connector is listed. | The Roland preset, over the USB cable. The second crash is already on the module's Crash 2 input: map it to the Crash 2 row. The toms are single-zone, so the rim notes in the preset's tom rows are never sent, which costs nothing. |
| Roland TD-07DMK2 | The same TD-07 module, PD-10H snare, KD-10 kick and four-post stand, with three PD-8H 8-inch toms, and CY-5 10-inch pads for the hi-hat (with a control pedal), the one crash and the ride. Roland includes a mounting rod for a second crash, which is sold separately and uses the module's Crash 2 input. The kick pedal and the throne are not included. | The same USB connection and Roland preset. With one crash, leave the Crash 2 row empty in the guided setup; it is there when you add the second one. |
| Roland TD-07KV | The earlier kit, still on Roland's kit list. Roland lists a PDX-8 8-inch snare with head and rim zones, three PDX-6A 6-inch single-zone toms, two 12-inch CY-8 cymbals, a KD-10 kick pad and a 10-inch hi-hat with a control pedal, on a module with the same USB COMPUTER port, MIX IN and OUTPUT/PHONES jacks and Bluetooth. | The same USB connection and Roland preset. It has one crash and a ride; the Crash 2 row stays empty unless you add a pad. |
Questions about the Roland TD-07KV2 and TD-07DMK2 models
What is the difference between the TD-07KV2 and the TD-07DMK2?
The pads around the same TD-07 module. Roland's lists give the TD-07KV2 a 10-inch floor tom, 12-inch CY-8 pads for the first crash and the ride, and a second crash; the TD-07DMK2 has three 8-inch toms, 10-inch CY-5 pads for the crash and the ride, and one crash, with a mounting rod for a second. The snare, the kick pad, the hi-hat pad and the stand are the same. In WebEDrums the connection and the preset are the same for both.
What changed from the TD-07KV to the TD-07KV2?
Roland's TD-07KV2 page does not compare the two; it says the pads come from its V-Drums 3 Series. Side by side, the parts lists differ in the snare (a 10-inch PD-10H in place of the 8-inch PDX-8), the toms (8-inch and 10-inch pads in place of three 6-inch ones) and the cymbals (a second crash is included). The module's connections are listed the same, so nothing changes in how the kit reaches WebEDrums.
Is a kick pedal included with the TD-07KV2 or the TD-07DMK2?
No. Roland's pages for both kits say the kick pedal and the drum throne are not included. The KD-10 is a kick pad that takes a pedal with a beater, so you add your own.
Does the TD-07's Bluetooth MIDI work with WebEDrums?
Roland lists Bluetooth on the TD-07 module for audio streaming and for MIDI over Bluetooth Low Energy. WebEDrums reads the module over the USB cable, and we have not tested the Bluetooth MIDI link.
How do the Roland TD-07KV2 and TD-07DMK2 connect to a computer?
Through the USB COMPUTER port, a USB-B socket on the TD-07 module. Roland's specification lists two things on that port: USB MIDI, and two-channel USB audio, which it says requires the vendor driver and vendor mode. WebEDrums needs only the MIDI. Use a cable that supports data transfer, not a charge-only one, and on Windows close any recording software that holds the module before opening the browser.
Roland also lists Bluetooth on the module, for audio streaming and for MIDI over Bluetooth Low Energy. We have not tested the Bluetooth MIDI link, so the connection described here is the cable.
Which preset do I pick in WebEDrums?
When the module's USB name matches a Roland module, the kit setup page starts from the Roland defaults, the table below, and says so: "Using the Roland defaults". Hit each pad and watch the kit on screen. If you changed note numbers on the module, run the guided setup instead ("Record every pad"): it listens to each pad, zone by zone, and saves what it hears. "Reset to the Roland defaults" brings the table back. Review each pad's lane before saving, and change it later in Settings, Kit, Edit mapping.
Which pads and zones does the Roland preset map?
This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the Roland defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.
| Pad | Notes the preset listens for | Plays as |
|---|---|---|
| Kick | 36 head | Kick |
| Snare | 38 head · 40 rim · 37 cross-stick | Red (snare) |
| Hi-hat | 46 bow · 26 edge · 42 bow · 22 edge | Yellow cymbal |
| Tom 1 (high) | 48 head · 50 rim | Yellow tom |
| Tom 2 (mid) | 45 head · 47 rim | Blue tom |
| Floor tom | 43 head · 58 rim | Green tom |
| Crash | 49 bow · 55 edge | Green cymbal |
| Ride | 51 bow · 59 edge · 53 bell | Blue cymbal |
| Crash 2 (optional) | 57 bow · 52 edge | Green cymbal |
- Toms: Roland notes that the PD-8H and PD-10H toms on these kits do not support rim shots, so only the head notes arrive. The rim notes in the table cost nothing.
- Second crash: the TD-07KV2 ships with one on the Crash 2 input, and the TD-07DMK2 has the input free with a mounting rod in the box. Notes 57 and 52 play the green cymbal with the first crash.
- Hi-hat: the preset listens for the open and closed notes on the bow and the edge and plays them all as the yellow cymbal; the control pedal's position messages are ignored and only the notes count.
How do I keep the latency down?
Roland lists a MIX IN mini jack and an OUTPUT/PHONES mini jack on the TD-07. A 3.5 mm cable from the computer's headphone output into MIX IN is the wiring the TD-02 page describes for hearing the song and the kit in the same headphones; Roland's TD-07 pages do not describe how MIX IN is mixed, so check the module's guide.
The module's own sounds have no software delay, so headphones on the module are the lowest-latency way to hear the kit. If you would rather hear the browser's drum sounds ("Kit sounds in the browser" in Settings, Audio, six kit styles), run the timing calibration once: eight clicks, hit the snare on each, about six seconds. It measures your computer's audio delay and judges hits against what you heard. Audio sent to the module or the headphones over Bluetooth adds its own delay to the song, so calibrate again after switching to it, or stay wired.
What works in Chrome, Edge and Firefox?
Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its own name after a one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and the setting survives reloads. Safari has no Web MIDI, so a Mac needs Chrome, Edge or Firefox. If the browser lists nothing, check that the cable carries data, try another port without a hub, and close any other program that has the module open.
Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.
Which games and apps read the Roland TD-07KV2 and TD-07DMK2?
Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.
Not bought it yet, or thinking of the next kit?
The buying guide puts the Roland TD-07KV2 and TD-07DMK2 next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each. The other Roland kits are on the Roland page.
Sources
Checked on November 11, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.
- Roland: TD-07KV2 product page (kit parts, TD-07 module, USB, Bluetooth)
- Roland: TD-07KV2 specifications (kit configuration, connectors, trigger inputs)
- Roland: TD-07DMK2 product page (kit parts, the second-crash mounting rod)
- Roland: press release, 15 October 2026 (the TD-07KV2 and TD-07DMK2 announced)
- Roland: TD-07KV product page (the earlier kit)
- Chrome for Developers: Web MIDI permission prompt