Which Pearl e/MERGE and Mimic Pro models work with WebEDrums?
The table lists what Pearl's manuals say about the e/MERGE sound module (MDL1) and the Mimic Pro module, checked on 8 November 2026. The manuals describe the modules, not the pads of each kit, so the pads are not listed here.
| Model | What the manufacturer lists | In WebEDrums |
|---|---|---|
| Pearl e/MERGE | Pearl's MDL1 manual lists a TO PC port (USB-B) that transmits and receives USB MIDI and receives USB audio, a MIDI OUT connector, an AUX IN jack and a TO MEMORY DRIVE port (USB-A) for WAV files and settings. It says that for audio the module uses the standard USB audio driver of Windows or macOS. | USB MIDI over the TO PC port; WebEDrums needs only the MIDI. |
| Pearl Mimic Pro | Pearl's manual lists five-pin MIDI IN and OUT, six balanced line outputs, a headphone jack and a USB connection for adding sounds from a thumb drive or cable, with a 120 GB solid state drive for instrument storage. It lets you set MIDI notes and channels for each pad zone in the trigger settings. | The manual does not describe the Mimic Pro as a USB MIDI device. For a computer, plan on a USB MIDI interface with five-pin cables, and check with Pearl. We have not tested the Mimic Pro. |
Questions about the Pearl e/MERGE and Mimic Pro models
Does the Mimic Pro connect to a computer over USB MIDI?
Pearl's manual describes the USB connection as for adding sounds and lists five-pin MIDI IN and OUT for MIDI. It does not describe USB MIDI to a computer, so use a USB MIDI interface with five-pin cables, and check with Pearl. We have not tested the Mimic Pro.
Do I need a driver for the e/MERGE?
Pearl's manual says that for audio the module uses the standard USB audio driver that comes with Windows or macOS, and does not mention a MIDI driver. WebEDrums needs only the MIDI.
Is there a Pearl preset in WebEDrums?
No. The kit setup page starts from the General MIDI defaults and says so. Pearl's Mimic Pro manual says you can set MIDI notes and channels per pad zone, so hit each pad to check it and record any that lights the wrong drum.
How do the Pearl e/MERGE and Mimic Pro connect to a computer?
The e/MERGE connects through its TO PC port, a USB-B socket. Pearl's manual says it transmits and receives USB MIDI over a USB 2.0 cable, receives USB audio, and uses the standard USB audio driver of Windows or macOS for the audio. It also has a MIDI OUT connector and a TO MEMORY DRIVE port for a USB flash drive.
The Mimic Pro is different. Pearl's manual lists a five-pin MIDI IN and OUT for moving MIDI data to and from an external MIDI source, and describes its USB connection as a way to add sounds from a drive or cable. It does not describe the Mimic Pro as a USB MIDI device, so for WebEDrums a computer needs a USB MIDI interface with five-pin cables between it and the module.
Which preset do I pick in WebEDrums?
WebEDrums has no preset of its own for the Pearl e/MERGE and Mimic Pro, so the kit setup page starts from the General MIDI defaults and says so: "Using the General MIDI defaults". Hit each pad and watch the kit on screen: every pad lights up the drum it plays. Re-record any pad that lights the wrong one, or choose "Record every pad" and the app listens to each pad in turn, zone by zone, and saves what it hears, which works for any kit. We have not checked the Pearl e/MERGE and Mimic Pro's own default note numbers against the table below, and the recorded setup does not depend on them. Review each pad's lane before saving, and change it later in Settings, Kit, Edit mapping.
Which pads and zones does the General MIDI preset map?
This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the General MIDI defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.
| Pad | Notes the preset listens for | Plays as |
|---|---|---|
| Kick | 36 head · 35 head | Kick |
| Snare | 38 head · 40 rim · 37 cross-stick | Red (snare) |
| Hi-hat | 42 bow · 46 bow | Yellow cymbal |
| Tom 1 (high) | 48 head · 50 rim | Yellow tom |
| Tom 2 (mid) | 45 head · 47 rim | Blue tom |
| Floor tom | 43 head · 41 head | Green tom |
| Crash | 49 bow · 55 edge | Green cymbal |
| Ride | 51 bow · 59 edge · 53 bell | Blue cymbal |
| Crash 2 (optional) | 57 bow · 52 edge | Green cymbal |
How do I keep the latency down?
Pearl's manuals list an AUX IN jack on the e/MERGE and an aux input on the Mimic Pro for playing a device through the module. A computer's headphone output into it puts the song and the kit in the same headphones if the module mixes it into them.
The module's own sounds have no software delay, so headphones on the module are the lowest-latency way to hear the kit. If you would rather hear the browser's drum sounds ("Kit sounds in the browser" in Settings, Audio, six kit styles), run the timing calibration once: eight clicks, hit the snare on each, about six seconds. It measures your computer's audio delay and judges hits against what you heard. Audio sent to the module or the headphones over Bluetooth adds its own delay to the song, so calibrate again after switching to it, or stay wired.
What works in Chrome, Edge and Firefox?
Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its own name after a one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and the setting survives reloads. Safari has no Web MIDI, so a Mac needs Chrome, Edge or Firefox. If the browser lists nothing, check that the cable carries data, try another port without a hub, and close any other program that has the module open.
Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.
Which games and apps read the Pearl e/MERGE and Mimic Pro?
Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.
Not bought it yet, or thinking of the next kit?
The buying guide puts the Pearl e/MERGE and Mimic Pro next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each.
Sources
Checked on October 16, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.